TXD doesn’t install. Four things the installer needs to do

TXD cuts the set from a 3D scan and ships it. We don’t wrap bikes, remove panels or guarantee an installer’s work. The shops listed on the homepage are independent, with publicly available details — not “exclusive partners”, and not a TXD guarantee.

You pay the shop for labor directly. Usually 2–3 hours, depending on the bike and the design. The curved panels on an Air Blade or SH take longer than a Vision.

Print these four steps and hand them to the installer (they’re not four questions for choosing a shop):

1. Remove the panels first. Don’t wrap them while they’re still on the bike — cleaner edges, and the blade stays away from the plastic.
2. Clean and remove wax/grease. Dust under the film turns into bubbles that won’t squeegee out.
3. Overlap about 35 mm where panels meet. The set is cut with the overlap built in; cutting flush makes gaps more likely.
4. Dry-fit before the adhesive goes down, especially the front shield and light covers.

Once your order is confirmed, TXD can send exactly these four steps over Zalo for you to pass on to the installer. TXD doesn’t book installation appointments for you.

When choosing a shop, ask separately: have they fitted a full-cover wrap on your model year, and do they have a heat gun? Unusually cheap labor plus wrapping the whole bike without removing the panels means accepting the risk at the edges.

We ship sets nationwide. Nha Trang is our registered business address, not a chain of shops. Message us on Zalo: your model + design code + the city where you want it fitted (TXD can suggest a shop if you ask — it’s still only a suggestion).